Semitrailer med lavt lasteplan

Faymonville 3-Achs-Beton-Innenlader-PrefaMAX

With every used semi-trailer, you receive a current and complete inspection and function report.

Gooseneck:
- Gooseneck designed as a loading platform with aluminum chequer plate covering
- Hydraulic lifting swing arm, approx. -280/+250 mm, can be raised and lowered
- Two king pin positions at DSR 2,300 and 2,000 mm
- Suitable for tractor units: 4x2, 6x2, or 6x4

Loading bay:
- Loading bay approx. 9,500 mm long, with angle profiles mounted underneath for accommodating load pallets
- Distance from king pin to center of axle assembly approx. 8,000 mm

Axles, suspension, and tires:
- BPW axle stubs, with drum brakes and independent wheel suspension, hydraulic axle compensation with lift and lower function
- Drop safety on the axles in case of air spring failure, designed for maximum pallet height of 150 mm
- Axle tools
- Tires: 385/65 R 22.5
- TPMS tire pressure monitoring sensors installed on all wheels including spare wheels
- TPMS tire pressure monitoring system in accordance with ECE R141

Included accessories:
- Detachable steel front wall, approx. 400 mm high
- On the gooseneck: 1 pair of foldable ALU sideboards, approx. 400 mm high, anodized
- On the gooseneck: a detachable ALU rear wall, approx. 400 mm high, anodized
- 2" king pin
- 3 pairs of recessed lashing rings on the gooseneck (LC 6,300 daN)
- Lighting for operating the gooseneck, suspension, and hydraulic securing, with on/off switch
- Toolbox with lid, embedded in the rear area of the gooseneck, approx. 640 x 700 x 215 mm
- Mechanical support legs for approx. 48,000 kg support load
- 4 wheel chocks with holders on the vehicle
- Access ladder on the right side in driving direction, with 2 detachable handrails
- Removable full paneling on both sides in front of the axle assembly
Guodpexwxi Njfx Aa Rei
- WABCO Roll Stability Support (RSS)
- 9 pairs of lashing rings on the longitudinal beams (LC 6,300 daN)
- On the longitudinal beams: a flush-mounted grating platform between the guide rails of the load securing system
- Hydraulic connections routed for later installation of our hydraulic load securing devices (3 pairs)
- First and last axle manually liftable on left and right
- Storage box behind axle assembly on left and right, splashproof
- Rear end bevelled for easier insertion of the loading pallets
- Lashing eyes mounted on the rear crossmember for mechanical securing
- Rear door with cross bracing, hinged on the left and hydraulically locked on the right, can be locked horizontally at 90°, 105°, and 270°
- Underride protection foldable upwards for transporting up to 4 empty standard pallets
- License plate bracket with illumination on the rear left of the semi-trailer
- A 7-pin socket on the rear crossmember
- Electro-hydraulic unit for operating hydraulic functions
- Round NATO socket on the front connection strip
- 2 axle load gauges mounted on the left side including axle load diagram
- 3 pairs of hydraulic load securing arms, adjustable, with pivoting arms, mounted on the longitudinal beams
- 1 spare wheel with holder on the right side in direction of travel, 385/65 R 22.5
- Central lubrication system with 1 pump, manufacturer BEKAMAX, standard grease version
- Removable protection cover for the central lubrication pump(s)
- EU reflector on the rear crossmember
- White reflector tape on the outer sides along the full length of the trailer according to EU regulations
- Red reflector tape on the rear over the full width of the trailer according to EU regulations

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.