Tresidig tipplastbil

MAN TGS 18.440 4x4 PK15.002 Kommunal Bordmatik

MAN TGS 18.440 4x4 BB Truck, crane, and tipper body are all in perfect working order.

Palfinger PK 15.002, year 2008 Remote control & elevated operator’s platform 3 extensions Crane lifting capacities: 4.3m x 3,040kg, 5.90m x 2,110kg, 7.9m x 1,530kg, 10.2m x 1,180kg

Schmidt Municipal Technology Type M/STR, year 2008 Meiller tipper Body dimensions: 4.80m length x 2.45m width x 0.75m side boards 1.20m front wall Side board automation (right) Fold-down (left) Trailer hydraulics Leaf-leaf suspension AdBlue tank Euro 4 Manual transmission 50mm towing pin Heated seat Air conditioning Reversing camera

Additional equipment:
* Standard parts
* Left-hand drive
* Standard engine components
* Engine position: front-mounted under cab
* Drive configuration: 04X04
* Suspension type: leaf/leaf
* Rear frame overhang 2350 mm
* Vehicle type: flatbed truck
* Model series: TGS
* U-parts engine / 1
* With/without gearbox software
* Gearshift via Bowden cable (SZS)
* Fuel filling dependent on tank
* Mandatory specification fuel tank
* Front axle VP-09 driven
* Water and intercooler up to 35°C ambient temperature
* Propeller shafts
* Base-line instrument cluster km/h
* Functional parameters for maintenance system
* Functional parameters for oil level monitoring/transmission maintenance
* Engine-dependent electrics
* U-parts steering column
* Steering make: ZF
* Air-compressor-dependent brake system
* Data set for brake system
* Brake piping
* AP axle ratio i = 4.00
* Wheels: disc 10-bolt 11.75-22.5 on 1st front axle TL
* Wheels: disc 10-bolt 9.00-22.5 on 1st rear axle TL
* Wheel: disc 10-bolt 9.00-22.5 as spare TL
* Fuel tank mounting
* Crankcase
* With/without EGR system
* Left-hand frame wiring harness
* Cruise-control-dependent wiring harness
* Wiring harness for tachograph
Nwodoybdc Rjpfx Adhjb
* Digital tachograph, make: CONTI
* Operating instructions for chart/tachograph
* Central onboard computer
* Entry step box
* Oil dipstick and guide tube
* Networking I/FS-CAN
* With/without T-CAN networking
* T-CAN wiring harness
* Sales group: cab shell
* Bulkhead trim
* Interior roof liner
* Roof shell
* Roof assembly
* Longitudinal carrier under cab
* Transmission-dependent system carrier
* Gearshift trim panel
* VIN adhesive label
* Model designation badge
* Driver seat installation
* Co-driver seat installation
* A-pillar trim
* B-pillar trim
* Electrical system for cab
* Lift-o-mat for front panel
* Front panel can be unlocked from inside
* Heating lines
* Stud welding arrangement
* Blank plugs
* With/without shift knob
* With/without gearshift gaiter
* Door locks
* Windscreen washer system for front window
* Washer system with reservoir
* Door control
* Left door
* Sales group: door extension
* Right door
* Door trim
* Door hinge for right and left door
* With/without protective foil on cab sidewall
* Turbocharger
* Interior roof trim
* Fabric inner door panel
* Engine and gearbox mountings
* Wiring harness for solenoid valves
* Solenoid valves
* Interior sidewall trims
* Thermostat insert
* Flywheel 430mm
* Control housing
* Power take-off shift for ZF
* Functional parameter for PTO/1
* General PTO parameterization
* Functional parameters engine
* Intake manifold
* Uncoated oil sump
* U-parts Bowden cable gearshift
* U-parts for ZF/EATON gearbox
* Adapter set for PTO N71/N283./NH
* Fuel line
* U-parts for fuel tank
* Fuel filter
* Oil cooler with oil filter
* Tipper indicator

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.