Kjølesemi

KRONE SDR 27 eL4-MT**ThermoKing*Zusatzverdampfer*LiftA

Saddle height unladen: 1,150 mm
Pallet/storage box
3 axles, each with 9,000 kg load capacity
KRONE axles with air suspension and disc brakes, ET 120
Brake disc diameter: 430 mm
With lifting and lowering device
Fully automatic load-dependent electronic lift axle control for 1st axle
Cargo floor
Type: BO 13310
Low-noise aluminum floor tray, PIEK-compliant
Floor load capacity tested according to EN 283, reinforced in the rear area
Box body:
Cool Liner Multitemp (Duoplex Steel) body
Thermal bridge-free panel construction, panels with steel cover sheets on both sides, 100% CFC-free foam
Panel thickness floor: 125 mm
Panel thickness front wall: 50 mm
Panel thickness roof: 85 mm
Panel thickness rear doors: 90 mm
Panel thickness side walls: 45 mm
Internal body length: 13,310 mm
Internal body width: approx. 2,495 mm
Internal body width reduced by baseboards/scuff rails
Internal height: 2,650 mm
Front wall
Sandwich panel with reinforcement and cut-out for Carrier or Thermo King refrigeration unit; impact-tested to Swedish standard
4 vertical spacer profiles (100 mm) inside the front wall for optimal air circulation
Roof
Sandwich panel with steel cover sheet; cable ducts for temperature sensors and lighting equipment located in the roof angle
Internal reinforcement for raised evaporator, channel in roof for routing refrigerant lines
Stainless steel (V2A) guard for additional remote evaporator
Bjdpfeyy Hnbsx Advsda
Evaporator positioned rear left
4 LED ceiling lights, surface-mounted and laterally offset
Door contact switch for interior lighting
Side walls
Full sandwich panels with steel cover sheet, painted outside, PVC-coated inside; floor tray joined on sides and front with wear-resistant aluminum angle base rail, approx. 300 mm high
1 pair of aluminum scuff rails, side, 285 mm high
Height of lower edge of first scuff rail above floor: positioned directly above angle base rail
Rear wall
Double-leaf rear doors, 3 aluminum hinges per door leaf; sealing system with external dust seal, V2A portal frame with dock seal edge top and bottom; external one-hand comfort lock
Rubber buffers as protective rail across the rear portal; additional vertical dock seal in the middle of the rear portal
One-hand comfort lock, double at the rear
Aluminum scuff rails inside rear wall doors, approx. 285 mm high
Door retainers as drop arm
2 red position lamps (LED) at top of rear frame
Accessories
Diesel tank (plastic), approx. 240 l, suitable for bio-diesel, fill cap on both sides, cap with cylinder lock
Tank sensor for diesel tank including LED level indicator on front wall
Refrigeration unit
Thermo King Spectrum SLX i for Multitemp, Diesel/Electric, incl. i-Box, with temperature/data logging (CargoWatch) incl. 2 temperature sensors, with additional evaporator type S-3 (deep freeze), Two Zone B system, refrigerant R 452 A
Installation and connection of 2nd temperature sensor included (for Thermo King refrigeration unit)
Tyres
6 units, 385/65 R 22.5
Tread depths:
1st axle: 4 / 3 mm
2nd axle: 13 / 12 mm
3rd axle: 10 / 11 mm
Customs license plates and insurance on request at extra cost! For export transactions, we can handle export declaration and registration for you upon reimbursement of costs. For export to non-EU countries, a deposit may be required.

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.