Åpen semitrailer med presenning

KÖGEL Kögel Cargo Pritschensattelanhänger

You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.

Excerpt from the equipment specification. Complete specification on request.

Chassis:
* Regular ladder frame in lightweight steel construction with through bolted cross members
* Coupling plate 8 mm thick, with a 2-inch kingpin according to DIN 74080 / ISO 337

Running Gear:
* Axle lift mechanism on axle 1, 18330.700, manufacturer of choice Kögel
* Three-axle assembly with disc brakes, approx. 430 mm Ø, inset depth approx. 120 mm
* Air suspension with approx. 180 mm travel

Vehicle Tyres:
* 6 x 385/65 R 22.5, 160J (European brand manufacturer of your choice, Kögel)

Chassis Attachments:
* Landing legs (manufacturer of your choice, Kögel), mechanical with compensating foot, approx. 24 t lifting capacity. Single-side operation, right in direction of travel
* Spray suppression system in accordance with Regulation (EU) No. 109/2011, consisting of 1 pair quarter-circle mudguards in front of axles and 1 pair quarter-circle mudguards with spray flaps behind the axles
* 2 wheel chocks with holder
* Pallet storage box for 24 Euro pallets, fully enclosed, splash-water protected, also functions as side underrun protection
Fsdpfx Ajy Rwycsktspg
* Ground clearance (front) 220 mm
* Plastic toolbox, waterproof, internal dimensions approx. 545 x 400 x 400 mm. Installed at rear left in direction of travel
* Retractable rear access ladder, mounted at rear right
* High, rigid rear underrun protection, steel, according to ECE-R58
* Height of underrun protection profile min. 120 mm, designed for increased test forces
* One pair of extendable warning signs for oversize loads, retroreflective red/white, with LED lighting, spiral cable, and plug connection. Positioned at the front and rear of the vehicle

Brake / Air Suspension System:
* EBS system 2S/2M with stability program (includes ABS/ALB function), EBS connector ISO 7638 (without connecting lines), parking brake as spring chamber brake, external pneumatic connections and external EBS diagnostic port via ISO 7638 connector
* EBS system (manufacturer of your choice, Kögel)
* Air suspension system incl. 1 lift and lower valve, installed left behind the axle assembly in direction of travel. Driving level adjusts automatically
* 2 non-interchangeable coupling heads at the front, ISO 1728
* Air tanks for brake system and air reserve made of steel (EN 286-2)

Floor:
* Panel floor approx. 30 mm thick
* Rear part of floor sealed

Body:
* WITHOUT front quick-release device for side curtain, with tensioning tubes
* Rear quick-release device for side curtain with tensioning tubes and ratchet
* Body strength meets EN 12642 XL (VDI 2700). Certified for a payload of approx. 27,000 kg

Front Wall:
* Front wall to superstructure height with aluminium volume corner posts, riveted with aluminium hollow profiles, screwed/riveted to frame, 1 pair of lashing rings according to EN 12640
* Inside of front wall reinforced with 12 mm plywood with phenolic surface, approx. 1,250 mm high

Rear Wall:
* Double-wing rear portal door made of aluminium, approx. 2,630 mm internal height
* 4 integrated swing bar locks (2 left, 2 right), manufacturer of your choice, Kögel
* Bolted rear corner posts in portal height made of aluminium
* Corner posts on both sides extendable by 500 mm each for loading/unloading. To operate, the sliding roof must be pushed forward and the rear wall doors opened
* 5 pairs of receptacle slots for load securing at r

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.