Åpen semitrailer med presenning

SCHWARZMÜLLER Plane S1 Mega Edscha Coilmulde Hubdach

Schwarzmüller Tautliner S1 Mega Edscha Coil Well, Lifting Roof

Permissible total weight: 36,000 kg

Unladen weight: 6,890 kg

Payload: 29,110 kg

Fifth wheel height (unladen): approx. 960 mm

Loading height: approx. 1,040 mm
Isdpfx Agoy R Hiaj Aeat

SAF axles

Air suspension

Disc brakes

Edscha sliding roof

Lifting roof

Hydraulic lifting roof with 400 mm total lift, independently adjustable at all four corner posts

Welded curtain side tarp, sliding tarpaulin on both right and left sides

Portal doors at the rear

Side under-run protection on left, right, and rear

2x crank supports

Access ladder at rear right

3x toolboxes on the left

Rubber docking buffers

Multilock outer frame

26 lashing rings on the right

25 lashing rings on the left

2 lashing rings in the front wall of loading area

Customs cord

ABS, EBS, ALB

DIN EN 12642 Code XL

Wheelbase: approx. 6,450 + 1,310 + 1,310 mm

Loading area LxWxH: approx. 13,610 x 2,480 x 3,005 mm

Overall dimensions LxWxH: approx. 13,850 x 2,550 x 4,000 mm

Clear rear door height: 2,814 mm

Clear rear door width: 2,480 mm

Coil well dimensions LxWxH: 7,400 x 1,160 x 300 mm

15x coil well covers

10x stanchion pockets in coil well

4x stanchions in coil well

1x spare wheel carrier including trailer spare wheel

1x spare wheel carrier including truck spare wheel

Tyres: 435/50R19.5 on steel rims

Tread depth (left front): 6 mm
Tread depth (left middle): 3 mm
Tread depth (left rear): 7 mm
Tread depth (right front): 5 mm
Tread depth (right middle): 4 mm
Tread depth (right rear): 6 mm

Additional Equipment:
3-axle ultralight mega sliding curtain flatbed semi-trailer RH80 - Coil

Internal length: approx. 13,610 mm
Internal width: approx. 2,480 mm
Rear entry width: approx. 2,480 mm
Internal loading height front: approx. 2,945 mm / 3,005 mm, adjustable
Internal loading height rear: approx. 2,945 mm / 3,005 mm, adjustable
Floor height adjustable by 60 mm
Rear entry height: approx. 2,760 mm
Fifth wheel height: approx. 960 mm
Front loading height: approx. 1,040 mm
Rear loading height: approx. 1,040 mm
Trailer in level position at approx. 960 mm fifth wheel height
Interchangeable 2" king pin
Chassis for unladen fifth wheel height approx. 960 mm - 1,050 mm (for air suspended tractor)
Outer frame with hole spacing approx. 100 mm, slotted holes 40/25 mm per DIN EN 12640, starting approx. 3,000 mm from front wall
21 pairs of flush 2.5 t lashing brackets and 5 pairs of 4 t lashing brackets in the coil well area along outer frame
Coil well with usable length approx. 7,400 mm
Standard design as per VDI 2700 for coil diameters 900 to max. 2,100 mm
Both sides lined with 24 mm phenolic resin panels
Reinforced cover made of 27 mm phenolic resin panels with triple wood support, forklift-loadable
5 pairs of sleeve housings in coil well for 80x80 mm square tube stanchions, located: 1x front, 1x approx. 1,840 mm (ahead of center), 1x at 2,520 mm, 1x at 3,680 mm, 1x at 5,330 mm
Mechanical steel support legs, 2x 12 t, single-side operation (right), with travel equalization
SAF Intradisc B9 axles
Axle spacing: 1,310 + 1,310 mm
Wheelbase: 7,650 mm
Brake system by Wabco
Aluminium air tanks
Air suspension with lifting and lowering functionality, special total lift approx. 250 mm
Axle load display via EBS CAN bus signal
Floor load capacity 5,460 kg (forklift axle load, as per CSC)
Front wall with 2 reinforced central supports
Curtain rod at front corner posts with tension lever, curtain can also be opened from the front
Aluminium double doors i

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.