KrokpåhengerMÜLLER-MITTELTAL
18 t.Außenroller Container Anhänger, 2 in 1
Krokpåhenger
MÜLLER-MITTELTAL
18 t.Außenroller Container Anhänger, 2 in 1
Fast pris pluss MVA
€ 37 500
(€ 44 625 brutto)
Produksjonsår
2026
Tilstand
Brukt
Plassering
Egestorf 

Grunnleggende data
Pris og beliggenhet
Fast pris pluss MVA
€ 37 500
(€ 44 625 brutto)
- Selgers plassering:
- Eichenstich 12, 21272 Egestorf, Tyskland

Ring
Tekniske detaljer
- Maksimal lastevekt:
- 13 700 kg
- Totalvekt:
- 18 000 kg
- Akselkonfigurasjon:
- 2 aksler
- Første registrering:
- 03/2026
- Neste kontroll (TÜV):
- 03/2027
- Lasteromslengde:
- 7 000 mm
- Lasteplassbredde:
- 2 480 mm
Detaljer om tilbudet
- Annonse-ID:
- A222-55-692
- Referansenummer:
- 6371
- Oppdatering:
- sist oppdatert 21.07.2026
Beskrivelse
* TRA 18.0:
* 2 in 1 = suitable for roll-off containers and as a low-loader
----Brakes:
* EBS electronic braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 10-ton Gigant axles
----Suspension:
* Air suspension with lifting and lowering system and RTR valve
----Drawbar:
* Curved drawbar 2,000 mm long with pivoting drawbar eye 40 / 50 mm (without 8° eye)
* GHD height adjustment device instead of drawbar spring
----Electrical System / Lighting:
* Tire pressure monitoring with display option in the truck via EBS signal - without truck-side installation -
* LED tail lights 12 / 24 V
* 15-pole power socket
Isdpfx Aozihcpsm Roba
----General Components:
* Toolbox made of powder-coated steel sheet approx. 1,000 x 300 x 600 mm
* Spare wheel holder on the right side
* Reflective contour strip on the side and rear
* Side impact protection
* Plastic quarter fenders with splash guard
* Plastic impact protection buffer at the rear
* Folding A-frame sign at the rear
----Loading Platform:
* Main frame with raised outer frames to guide the roll-off containers
* Steel sheet floor with recesses for rollers in the bogie area
* Continuous length of 5,500 - 7,000 mm possible
* Pneumatic 4-point clamp locking system and mech. plug-in stop angles at the front in the track, load securing certificate according to DIN 30722 - 1
* Welded bead as anti-slip surface in the track area of the ramp
* Mech. rear support legs
----Load Securing:
* 1 pair of 10-ton UVV lashing rings at the front on the end wall cross member
* 3 pairs of 10-ton UVV lashing rings on the side in the outer frame
* 4 x 2-ton lashing eyes in cloverleaf design on each side
* 4 x 8-ton lashing brackets recessed in the outer frame
----Ramps:
* 1 pair of aluminum loading ramps (10.6 tons / pair) 2,800 x 470 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment from the rear)
----Painting:
* Chassis, bogie, locking parts, rear support legs hot-dip galvanized
* but the drawbar, axles, air tank painted in a black tone
----Information:
* Vehicle has full manufacturer warranty until 03.2027
* Errors and prior sale excepted
* The trailer is in new condition and has only been used a maximum of 5 times
----Delivery Time:
* Available for immediate delivery from Egestorf on the A7
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
* 2 in 1 = suitable for roll-off containers and as a low-loader
----Brakes:
* EBS electronic braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 10-ton Gigant axles
----Suspension:
* Air suspension with lifting and lowering system and RTR valve
----Drawbar:
* Curved drawbar 2,000 mm long with pivoting drawbar eye 40 / 50 mm (without 8° eye)
* GHD height adjustment device instead of drawbar spring
----Electrical System / Lighting:
* Tire pressure monitoring with display option in the truck via EBS signal - without truck-side installation -
* LED tail lights 12 / 24 V
* 15-pole power socket
Isdpfx Aozihcpsm Roba
----General Components:
* Toolbox made of powder-coated steel sheet approx. 1,000 x 300 x 600 mm
* Spare wheel holder on the right side
* Reflective contour strip on the side and rear
* Side impact protection
* Plastic quarter fenders with splash guard
* Plastic impact protection buffer at the rear
* Folding A-frame sign at the rear
----Loading Platform:
* Main frame with raised outer frames to guide the roll-off containers
* Steel sheet floor with recesses for rollers in the bogie area
* Continuous length of 5,500 - 7,000 mm possible
* Pneumatic 4-point clamp locking system and mech. plug-in stop angles at the front in the track, load securing certificate according to DIN 30722 - 1
* Welded bead as anti-slip surface in the track area of the ramp
* Mech. rear support legs
----Load Securing:
* 1 pair of 10-ton UVV lashing rings at the front on the end wall cross member
* 3 pairs of 10-ton UVV lashing rings on the side in the outer frame
* 4 x 2-ton lashing eyes in cloverleaf design on each side
* 4 x 8-ton lashing brackets recessed in the outer frame
----Ramps:
* 1 pair of aluminum loading ramps (10.6 tons / pair) 2,800 x 470 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment from the rear)
----Painting:
* Chassis, bogie, locking parts, rear support legs hot-dip galvanized
* but the drawbar, axles, air tank painted in a black tone
----Information:
* Vehicle has full manufacturer warranty until 03.2027
* Errors and prior sale excepted
* The trailer is in new condition and has only been used a maximum of 5 times
----Delivery Time:
* Available for immediate delivery from Egestorf on the A7
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Tilbyder
Merk: Registrer deg gratis eller logg inn, for å få tilgang til all informasjon.
Registrert siden: 2001
171 Annonser på nett
Send forespørsel
Telefon & Faks
+49 40 33... annonser
Disse annonsene kan også være av interesse for deg.
Annonse
Egestorf
816 km
Lavtlaster tilhenger
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
Annonse
Egestorf
816 km
Krokpåhenger
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
Annonsen din har blitt slettet
Det har oppstått en feil
























































































































