Potetteknologi

Grimme Kartoffelvollernter EVO 280 (Gen1)

Hopper
Hectares (ha): 560
Platform
Sorting
Weather protection

Equipment:
- EVO 280
- AT - Austria. With operating manual in the official language
- Country-specific equipment already defined by country of use
- Complete EU type approval
- Tow ball coupling Ø 80 mm
- Cardan shaft 1 3/4" fine-toothed
- Drive with pto speed 540 rpm
- Direct drive
Crsdpfx Aoz I E Dlef Sjh
- Row spacing 75 cm, pickup width: 580 mm
- Plastic clod breaker drums: Ø 390 mm
- 2-blade share, long
- Digging depth adjustment from the terminal
- TerraControl
- Automatic ridge center detection
- 4 single discs
- Sieve channel width 1500 mm
- 1st sieve belt spacing 45 mm
- 1st sieve belt with locking connection
- Spacing-independent friction drive, 1st sieve belt with support roller
- Speed 1st sieve belt - fast, V2A sheets in the oscillating frame
- Oscillating beaters in the 1st sieve belt with speed adjustment from the terminal
- 2nd sieve belt spacing 35 mm
- 2nd sieve belt with locking connection
- Spacing-independent friction drive, 2nd sieve belt
- VarioDrive: stepless drive for the 1st and 2nd sieve belts
- Speedtronic Web: pre-selection speed and load-dependent sieve belt control
- Coarse soil band spacing 280 mm
- Adjustment for scraper combs from the terminal
- 1 soil scraper shaft under the coarse soil band, hydraulically driven, oil cooler for self-hydraulics
- Belt 1st separator spacing 40 mm, V-profile hedgehog rod 1st separator
- Scraper 1st separator, smooth roller scraper
- Inclination adjustment of the 1st and 2nd separator from the terminal
- Height adjustment scraper roller 1st separator from the terminal
- Cleaning device in the hedgehog belt of the 1st separator
- Angle adjustment scraper roller 1st separator mechanically
- Slip monitoring 1st separator and 2nd sieve belt
- 2nd separator: hedgehog belt with rods
- Belt 2nd separator spacing 40 mm
- V-profile hedgehog rod 2nd separator
- Scraper 2nd separator, smooth roller scraper
- Speed adjustment for 2 brush or finger belts from the terminal
- Inclination automatic for 1st and 2nd separator
- Speed adjustment for 1st and 2nd separator from the terminal
- Mechanical angle adjustment of the scraper roller of the 2nd separator
- 3rd separator: hedgehog belt with rods
- UB separator: two double-row finger scraper belts
- Belt 3rd separator spacing: 40 mm
- H-profile hedgehog rod 3rd separator
- Height adjustment of the finger belt right and left, from the terminal
- Height adjustment scraper rollers 2nd separator from the terminal
- Mechanical height adjustment of the scraper rollers of the 3rd separator
- Turbo Clean
- Picking table (1100 mm)
- Comfort package picking table Pro
- Lighting for picking table
- Picking belt with lugs
- Mixing belt adjustable, differential speed to the picking table
- Pre-elevator with ultrasonic sensor
- 8.0 t hopper
- Hopper belt with fabric
- Hopper filling system including automatic for pre-elevator and filling optimization
- Potato discharge on the roller bottom hopper for box filling/fall brake
- Potato discharge for 1.20 m wide boxes
- Hydraulic folding device for potato discharge
- Air brake
- Maximum permissible speed 40 km/h
- Automatic axle center detection and inclination automatic
- Tire size 800/45-30.5
- Telescopic axle for the left rear wheel
- SmartView Pro
- Lighting package Pro
- CCI 800 operating terminal
- Control box GBX 860
- ISOBUS
- MemoryControl
- Connection to myGRIMME mineral oil
- Load-Sensing Kit with control line to the tractor
- Weather protection

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.