Hjullaster

CATERPILLAR 906 4IN1 Schaufel + Palettengabel 3ter Steuerkre

CAT 906 Wheel Loader
3rd hydraulic circuit / hydraulic quick coupler
with 4-in-1 bucket and pallet fork

Engine power: 46.5 kW / 62 hp CAT diesel engine
Hydrostatic single-range transmission with two speed stages
Static tipping load with bucket, fully articulated (DIN 24094): 3,030 kg

4-in-1 bucket:
Capacity: 900 liters / 0.9 m³,
Width: 1,870 mm,
CAT tooth system,
with bolt-on cutting edge

Pallet fork:
Fork tines: 45x100x1,120 mm,
Fork carrier width: 1,400 mm

CAT 906 Wheel Loader:

Attachment: CAT906,
Road traffic regulations lighting,
Full cab with 2 doors,
Windshield wiper front,
Windshield wiper rear,
Internal sun visor on windshield,
Driver's seat mechanically suspended,
Steering column adjustable horizontally,
Parking brake mechanical,
Radio preparation,
Towing eye rear,
3rd hydraulic circuit,
3rd hydraulic circuit coupling BG3 flat seal,
Hydraulic quick coupler,
Continuous operation sweeper,
Heater,
Battery master switch,
Lift arm length: 2,130 mm,
Height: 2,725 mm,
Width: 1,870 mm,
Wheelbase: 2,030 mm,
Tires: MITAS EM-01 405/70R18 156B/168A2,

Engine:
CAT four-cylinder engine,
Type: 3034,
Rated speed: 2,600 1/min,
Rated power: 46.5 kW / 62 hp,
Cylinder dimensions bore: 97 mm,
Cylinder dimensions stroke: 100 mm,

Transmission and Brakes:
Maximum speed forward/reverse slow range: 7 km/h,
Maximum speed forward/reverse fast range: 20 km/h,
Hydrostatic single-range transmission with two speed stages and closed circuit,
with variable displacement pump and variable displacement motor, which drive a fixed gearbox mounted on the frame,
Rigid front axle with limited slip differential and planetary gear final drives,
Central service and parking brake in the drive train (dry disc brake),
Brake system complies with ISO 3450:1996,

Hydraulic System:
Maximum pump flow: 68 l/min,
Maximum operating pressure: 235 bar,

Hydraulic cycle times:
Lifting: 4.5 s,
Dumping: 1.5 s,
Lowering (float position, engine rated speed, max. payload): 3.2 s,

Fjdpfx As Ai Ibqjd Njpp
Capacities:
Cooling system: 14 liters,
Fuel tank: 74 liters,
Hydraulic system: 66 liters,
Diesel engine: 8 liters,

Operator Cab:
Caterpillar cab with rollover protective structure (ROPS) and falling object protective structure (FOPS),

Operating data:
Operating weight (ISO 6016:1982): approx. 4,960 kg,
Bucket nominal capacity (ISO 7546:1983): approx. 0.8 m³,
Maximum lift force: 41 kN,
Maximum breakout force: 46 kN,
Rated payload, fully articulated (ISO 5998:1986): 1,515 kg,
Static tipping load with bucket, straight (ISO 8313:1989): 3,430 kg,
Static tipping load with bucket, fully articulated (DIN 24094): 3,030 kg,
Tilt-back angle (travel position): 53°,
Lifting capacity with pallet forks, fully articulated (EN 474-3/DIN 24094, stability factor 1.25 for solid, level ground, load center of gravity 500 mm): 2,015 kg,
Tipping load with pallet forks, fully articulated (forks 100 mm above ground level): 2,500 kg

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.