Arbeidsplattform semitrailerES-GE
3-Achs Sattelanhänger - Bordwände + CV
Arbeidsplattform semitrailer
ES-GE
3-Achs Sattelanhänger - Bordwände + CV
Tilstand
Ny
Plassering
Essen 

Grunnleggende data
Pris og beliggenhet
- Selgers plassering:
- Heegstraße 6-8, 45356 Essen, Tyskland

Ring
Tekniske detaljer
Dimensjoner og vekt
Totalvekt:
39 000 kg
Maksimal lastevekt:
32 340 kg
Aksler og hjul
Akselkonfigurasjon:
3 aksler
Sikkerhetsfunksjoner
ABS
Detaljer om tilbudet
- Annonse-ID:
- A233-60-780
- Referansenummer:
- 36242
- Oppdatering:
- sist oppdatert 20.11.2026
Beskrivelse
You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment details are available upon request.
Chassis: Welded construction made of high-quality steel profiles with continuous profile crossmembers, designed for high point loads.
Fifth Wheel: 2-inch kingpin.
Underrun Protection: Bolted design, compliant with EC regulations.
Side Underrun Protection: Compliant with EC regulations.
Landing Gears: 2 x 12 t landing gears with leveling foot and single-sided operation on the front right.
Axles: 3 x 9 t air suspension axle assemblies, disc brakes, manufactured by SAF, with disc brakes of approximately 430x45 mm, ABS, wheel mounting centered with 10 holes and an offset of 120, total suspension travel of approximately 200 mm, including lifting of approximately 140 mm and lowering of approximately 60 mm, controlled via rotary slide valve with detent function.
Braking System: Two-circuit compressed air braking system compliant with EC regulations, with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, interlock-protected coupling heads permanently mounted on the front crossmember, without connecting line to the towing vehicle.
Tires: 6 tires, 385/55 R22.5 160J on steel rim 11.75 X 22.5, offset 120, manufacturer of our choice.
Fenders: Compliant with EC regulations, PVC fenders in front of and behind the axle assembly.
Spare Wheel Holder: 1 double cradle with mounting hardware for a spare wheel with an offset of 120.
Load Securing: - 9 pairs of foldable lashing rings, evenly distributed, tensile force approximately 8.0 t. - 8 pairs of foldable lashing rings, evenly distributed, tensile force approximately 2.5 t. - A hole for lashing straps is provided approximately every 500 mm in the outer frame.
Front Wall: Reinforced steel construction, fixed. Internally lined with approximately 9 mm screen-printed board (approximately 1,250 mm high).
Floor: Approximately 28 mm Z-hardwood flooring recessed in the outer frame.
Lighting System: Compliant with EC regulations, 24 volts, with multi-chamber lights, LED side marker lights, LED position lights white at the front, LED outline lights at the rear, license plate lights. 1x15- and 2x7-pin connectors on the front crossmember.
Equipment: - 2 wheel chocks with bracket. - Warning sign ECE 70. - Bracket for rotating beacon (without rotating beacon).
Paintwork: Chassis and front wall sandblasted, primed, and single-color top-coated.
Chassis: RAL 3002 carmine red.
Side Walls: Anodized.
Side Wall Profiles: RAL 3002 carmine red.
Hubs: KTL (cathodic electrodeposition).
Iodpfx Ao Ak Skpjl Istp
Rims: Silver.
SSV (Steering System Valve): Aluminum, anodized.
Underrun Protection: White (RAL 9010).
Components: Galvanized/KTL black.
Contour Marking: Compliant with EC regulations, yellow on the sides and rear with ES-GE logo.
Including accessories.
First axle can be lifted, with fully automatic, load-dependent lift control.
10 pairs of pocket slots in the outer frame, evenly distributed.
4 rows of pocket slots transverse to the loading area.
20 pieces of stanchions made of galvanized tube 80/50, total length approximately 1,000 mm.
Internally, a magazine for 20 pieces of plug-in stanchions on the front wall.
5 x 25 mm side walls and rear wall made of anodized aluminum hollow profiles, foldable and removable, removable Kinnegrip stanchions.
Side
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Chassis: Welded construction made of high-quality steel profiles with continuous profile crossmembers, designed for high point loads.
Fifth Wheel: 2-inch kingpin.
Underrun Protection: Bolted design, compliant with EC regulations.
Side Underrun Protection: Compliant with EC regulations.
Landing Gears: 2 x 12 t landing gears with leveling foot and single-sided operation on the front right.
Axles: 3 x 9 t air suspension axle assemblies, disc brakes, manufactured by SAF, with disc brakes of approximately 430x45 mm, ABS, wheel mounting centered with 10 holes and an offset of 120, total suspension travel of approximately 200 mm, including lifting of approximately 140 mm and lowering of approximately 60 mm, controlled via rotary slide valve with detent function.
Braking System: Two-circuit compressed air braking system compliant with EC regulations, with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, interlock-protected coupling heads permanently mounted on the front crossmember, without connecting line to the towing vehicle.
Tires: 6 tires, 385/55 R22.5 160J on steel rim 11.75 X 22.5, offset 120, manufacturer of our choice.
Fenders: Compliant with EC regulations, PVC fenders in front of and behind the axle assembly.
Spare Wheel Holder: 1 double cradle with mounting hardware for a spare wheel with an offset of 120.
Load Securing: - 9 pairs of foldable lashing rings, evenly distributed, tensile force approximately 8.0 t. - 8 pairs of foldable lashing rings, evenly distributed, tensile force approximately 2.5 t. - A hole for lashing straps is provided approximately every 500 mm in the outer frame.
Front Wall: Reinforced steel construction, fixed. Internally lined with approximately 9 mm screen-printed board (approximately 1,250 mm high).
Floor: Approximately 28 mm Z-hardwood flooring recessed in the outer frame.
Lighting System: Compliant with EC regulations, 24 volts, with multi-chamber lights, LED side marker lights, LED position lights white at the front, LED outline lights at the rear, license plate lights. 1x15- and 2x7-pin connectors on the front crossmember.
Equipment: - 2 wheel chocks with bracket. - Warning sign ECE 70. - Bracket for rotating beacon (without rotating beacon).
Paintwork: Chassis and front wall sandblasted, primed, and single-color top-coated.
Chassis: RAL 3002 carmine red.
Side Walls: Anodized.
Side Wall Profiles: RAL 3002 carmine red.
Hubs: KTL (cathodic electrodeposition).
Iodpfx Ao Ak Skpjl Istp
Rims: Silver.
SSV (Steering System Valve): Aluminum, anodized.
Underrun Protection: White (RAL 9010).
Components: Galvanized/KTL black.
Contour Marking: Compliant with EC regulations, yellow on the sides and rear with ES-GE logo.
Including accessories.
First axle can be lifted, with fully automatic, load-dependent lift control.
10 pairs of pocket slots in the outer frame, evenly distributed.
4 rows of pocket slots transverse to the loading area.
20 pieces of stanchions made of galvanized tube 80/50, total length approximately 1,000 mm.
Internally, a magazine for 20 pieces of plug-in stanchions on the front wall.
5 x 25 mm side walls and rear wall made of anodized aluminum hollow profiles, foldable and removable, removable Kinnegrip stanchions.
Side
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Tilbyder
Merk: Registrer deg gratis eller logg inn, for å få tilgang til all informasjon.
Registrert siden: 2003
59 Annonser på nett
Send forespørsel
Telefon & Faks
+49 201 8... annonser
Disse annonsene kan også være av interesse for deg.
Vellykket
Meldingen din er sendt.
Annonse
Essen
1 005 km
Arbeidsplattform semitrailer
ES-GE3-Achs Sattelanhänger - Bordwände + CV
ES-GE3-Achs Sattelanhänger - Bordwände + CV
Annonsen din har blitt slettet
Det har oppstått en feil












