Høyteknologi

Metal-Fach Ballenwickler Z 529 selbstladend hydr

Metal-Fach
Bale Wrapper
Kljdpfehlr Sxex Ah Uow
Z529
self-loading
Length: 2220mm
Width: 1420mm
Height: 2650mm
Weight: 780kg
Tractor hitch: three-point linkage
Machine drive: hydraulic
Tractor power: 60KW
Recommended flow rate of the tractor pump: 26 l/min
Recommended hydraulic pressure: 14 MPa
Bale size: 1200mm - 1500mm
Film width: 750mm

Standard equipment:
Three-point linkage
Film cutter
Film pre-stretcher 750mm
Manual control panel
Semi-automatic or fully automatic wrapping process

The Z529 bale wrapper is a machine that is attached to the front or rear three-point linkage of the tractor. It is loaded from below, which is done with the help of special arms equipped with rotating rollers. The wrapping process is automatic thanks to the arm that rotates around the bale and has an attached film feed, which coats the bale rotating on the rollers with film. After the wrapping process is complete, the film is caught and cut by a hydraulically controlled cutter. After confirmation with a button, the wrapped bale is unloaded to the ground by opening the arms with rollers. The machine can wrap bales with a diameter of 1200-1500 mm. The maximum weight of the wrapped bale must not exceed 1000 kg. Wrapping a bale with a diameter of 1200 mm takes about two minutes. The compact dimensions of the machine allow for easy movement in the field or on the farm. Due to the relatively low weight of the bale wrapper (780 kg), it can be transported and operated with a tractor with a power of only 60 kW. The standard equipment includes a 750 mm film feed, a hydraulically driven film cutter, and the control panel. Optionally, the machine can be equipped with a hydraulic bale unloader, which enables the placement of the wrapped bale on its base.

ATTENTION!!!!! READ CAREFULLY!!!!!

We expressly reserve the right to sell the item in the meantime, as we also offer this item on other platforms.
We strongly recommend an inspection and examination so that no false impressions arise in the buyer about the condition and suitability. Inspections and examinations are possible and expressly desired at any time after prior arrangement!!!
Images are similar and may include optional accessories that are subject to an additional charge.
The specified internal dimensions are approximate.
TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!!
EXCHANGE DEALS AND PAYMENT PLANS POSSIBLE!!!
Exhibition grounds: 58285 Gevelsberg, Am Sinnerhoop 17
Opening hours: Monday - Friday 8.30 am to 5.00 pm, Saturday 8.30 am to 2.00 pm
Constantly over 500 new and used trailers in stock!!!

Pegasus Anhänger GmbH
Am Sinnerhoop 17
58285 Gevelsberg
Tel.: Fax:

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.