Bytt chassis

Fliegl TWP 180 Jumbo Z

Further information
Chassis Wechel central axle trailer
Fine-grained steel welded construction
Front stop, longitudinally adjustable and foldable
2 pairs of removable guide rollers, front and rear
Folding locking adapter + height adjustment for parking height 1,000 - 1,120 mm, center supports can be folded and guide rollers can be pushed upwards,
4 container locking devices with sturdy outriggers on 20-basefor swap bodies 7.15 / 7.45 and 7.82
1 pair of gear support legs at the front, with straight lower section and single-sided operation in FR right
2 wheel chocks with holder
Aluminum side bumpers
Steel underride guard
Half-shell mudguards
Towing device central axle trailer
Towbar with tested 50 mm towing eye, forwarding agent version (not suitable for trucks with tail lift, or exact testing still required in case of order)
Under-coupler drawbar, free drawbar length approx. 2200 mm
Axles + suspension
SAF drum brake axles
Axle/chassis laser-measured Reduction of tire wear and fuel consumption
Air suspension
Brake system
2-line compressed air brake systemColor-coded line routing for easy servicing.
Spring-loaded parking brake
2 non-interchangeable coupling heads at the front, with connecting lines to the engine trolley, connection in FR-right
Prodpfx Acji Riy Nj Hjc
EBS, electronic brake system with EBS plug at the front, with connecting cable, connection in FR right-hand side
Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS!
with lifting & lowering valve, holding function in each case in lowering / lifting position
Vehicle - driving stability system
Wheels and tires
235/75 R17.5`` tires of the manufacturer's choice
Steel rims in twin arrangement, factory silver
Electrical system
24 volt, multi-chamber lights, amber LED lighting at the sides
2 white position lights at the front
2 white/red lane departure lights at the rear
1 x 15-pin plug at the front, with connecting cable, connection in FR right-hand side
2 additional LED work lights at the rear, switched via reversing light
1 LED work light at the front, centered between the carriers, radiating to the rear, switched via reversing light
Operating instructions
The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution)
Country of registration / plates
Germany
with Dekra approval and expert opinion (according to §13 EG - FGV)
24/7 service hotline
Prepared for single-line license plate holder
Warning sign according to ECE - 70
Contour markings with reflective strips to ECE R 048, white at the sides and red at the rear
Paint finish
Frame DB 7350 nova gray10-year warranty against rusting through
Attention: Archive pictures!

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.