Tilhenger med arbeidsplattformMÜLLER-MITTELTAL
14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
Tilhenger med arbeidsplattform
MÜLLER-MITTELTAL
14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
fast pris pluss MVA
€ 29 900
(€ 35 581 brutto)
Produksjonsår
2025
Tilstand
Ny
Plassering
Egestorf 

Bilder viser
Vis kart
Grunnleggende data
Pris og beliggenhet
fast pris pluss MVA
€ 29 900
(€ 35 581 brutto)
- Selgers plassering:
- Eichenstich 12, 21272 Egestorf, Tyskland

Ring
Tekniske detaljer
- Maksimal lastevekt:
- 10 800 kg
- Totalvekt:
- 14 400 kg
- Akselkonfigurasjon:
- 2 aksler
- Lasteromslengde:
- 6 270 mm
- Lasteplassbredde:
- 2 470 mm
Detaljer om tilbudet
- Annonse-ID:
- A204-85-580
- Referansenummer:
- 62471a
- Oppdatering:
- sist oppdatert 21.01.2026
Beskrivelse
* ETÜ-TA-R 14.4:
----Brakes:
* EBS brake system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with equalizer assembly
----Drawbar / Flange Drawbar Eye:
* Drawbar adjustable in height by 300 mm
* Drawbar extension by 250 mm, up to 2,250 mm
----Electrics / Lighting:
* Tire pressure monitoring with the option of display in the truck via EBS signal—no truck-side installation required
* 15-pin power connector
* LED lighting system 12 / 24 V
* EBS multi-voltage system for towing vehicles with 12 and 24 V electrics
----General Attachments:
* Support winch at the front
* Outward folding rear supports
* Plastic toolbox approx. 858 x 500 x 500 mm mounted at the front right outside of the bulkhead
* Lateral underrun protection
* Plastic quarter mudguards
----Low Loader Deck:
* 50 mm softwood floor
* Preparation in front of the bulkhead for retrofitting container locks
* Bolted 400 mm bulkhead made of smooth sheet metal
* Rear stanchions bolted
* Drop sides with spring assist
----Load Securing:
Cedpfxsxvgrpj Ag Sjpu
* Perforated outer frame, angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm
* Installation of 3 t retractable lashing rings possible every 600 mm
* 1 x 6.3 t lashing point in each corner at the front and rear
* Various drilled holes in front and rear cross-members for 1.2 t lashing options
----Ramps:
* One-piece hydraulic grate drive-up ramps approx. 2,750 x 600 mm (can be retracted to 20 mm)
* Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck from over 40 l/min up to max. 140 l/min)
----Paintwork:
* Chassis, drawbar, front wall, mechanical fall supports and drive-up ramps hot-dip galvanized
* Axles, springs, air tanks, front support winch, and flange drawbar eye painted in black
* Sideboards painted in RAL 2011 deep orange
* Painting of side walls in an RAL colour available at extra cost
----Info:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately ex Egestorf
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
----Brakes:
* EBS brake system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with equalizer assembly
----Drawbar / Flange Drawbar Eye:
* Drawbar adjustable in height by 300 mm
* Drawbar extension by 250 mm, up to 2,250 mm
----Electrics / Lighting:
* Tire pressure monitoring with the option of display in the truck via EBS signal—no truck-side installation required
* 15-pin power connector
* LED lighting system 12 / 24 V
* EBS multi-voltage system for towing vehicles with 12 and 24 V electrics
----General Attachments:
* Support winch at the front
* Outward folding rear supports
* Plastic toolbox approx. 858 x 500 x 500 mm mounted at the front right outside of the bulkhead
* Lateral underrun protection
* Plastic quarter mudguards
----Low Loader Deck:
* 50 mm softwood floor
* Preparation in front of the bulkhead for retrofitting container locks
* Bolted 400 mm bulkhead made of smooth sheet metal
* Rear stanchions bolted
* Drop sides with spring assist
----Load Securing:
Cedpfxsxvgrpj Ag Sjpu
* Perforated outer frame, angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm
* Installation of 3 t retractable lashing rings possible every 600 mm
* 1 x 6.3 t lashing point in each corner at the front and rear
* Various drilled holes in front and rear cross-members for 1.2 t lashing options
----Ramps:
* One-piece hydraulic grate drive-up ramps approx. 2,750 x 600 mm (can be retracted to 20 mm)
* Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck from over 40 l/min up to max. 140 l/min)
----Paintwork:
* Chassis, drawbar, front wall, mechanical fall supports and drive-up ramps hot-dip galvanized
* Axles, springs, air tanks, front support winch, and flange drawbar eye painted in black
* Sideboards painted in RAL 2011 deep orange
* Painting of side walls in an RAL colour available at extra cost
----Info:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately ex Egestorf
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Tilbyder
Merk: Registrer deg gratis eller logg inn, for å få tilgang til all informasjon.
Registrert siden: 2001
Send forespørsel
Telefon & Faks
+49 40 33... annonser
Disse annonsene kan også være av interesse for deg.
Annonse
Egestorf
816 km
Tilhenger med arbeidsplattform
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
Annonse
Egestorf
816 km
Lavtlaster tilhenger
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
Annonsen din har blitt slettet
Det har oppstått en feil






























































